WAIT.. WHICH FUNCTIONS?!
As we all know, ZBrush is a incredibly powerful tool. It has a zillion functions and options. Some of them are more exposed while others are hidden in the darkest corners of the software. For starters, all the tools may be a bit overwhelming. But fear not! After a few days, you’ll know your way around.
But.. Even after two years, I still discover new tricks and tools on a daily basis. I honestly wish I had knew these things when I started out! They just make life so much easier. Hopefully these tips will provide some help for young guys like myself.
BACKFACE MASKING
The first thing I want to talk about is called backface masking. It’s a little checkbox that prevents polygons on the back of your mesh to be manipulated. Definitely a must have when sculpting body parts like the ears! It can be found inside the brush pallette, in the Auto Masking sub-category. Aha! Backface Auto Mask, that’s the box you have been looking for.
To illustrate how it works, I made a reasonably thin rectangle. This is the front and this is the back. See the purpose? Great!
I recommend to place it somewhere easier accessible. Not sure how to? Read further!
CUSTOM USER INTERFACE
Jep, you heard that right. You can customise the whole ZBrush interface. It’s a pretty good idea to get rid of that standard UI and start building your own. I am a lot more productive once I’m settled with a user interface I know and trust. The one on the left is my current UI, and the one on the right the standard one. Quite a lot better, isn’t it? The best about this is the fact that it’s reasonably easy to do.
The guys at Pixologic already explain quite well how to do it over here.
If you don’t feel like picking all those colours and moving those palettes, you can try out polypusher‘s custom UI. It’s an excellent starting point. I use a personalised version of his UI as well.
USEFUL SHORTCUTS
You can customise your UI as much as you like to, but there’s nothing faster than simple keyboard shortcuts.
Pressing “S” opens up your size box , right under your cursor! Personally, I use this all the time.
Another useful one is pressing “B”. This opens up the brushes menu. Next step is pressing the starting letter of your brush. This filters out all the brushes not starting with this letter. All you have to do now, is look at the letter assigned to that brush. In most cases it’s pretty obvious! Some examples: Move: BMV - Standard: BST - Clay BuildUp: BCB - Dam Standard: BDS, etc. This is without any doubt the fastest way to switch between your brushes.
Shift + F will draw the polyframe on your mesh.
LAZYMOUSE
Have you ever wondered how other people pull of those awesome, smooth strokes ? Well, I did for a while. It definitely requires some skill, but there’s also a trick to it. There’s a checkbox under the stroke menu, called “lazymouse”. It does exactly what you would expect, namely making your mouse lazy as fuck. It’s awesome. Drawing won’t take place under the cursor, but under a brush point that is dragged behind. The higher the slider value, the further away that point will be. Experiment with the slider values, I find it to be very intuitive.
CHANGE THAT BACKGROUND COLOUR!
Hey, what a pretty background gradient over there! .. Said nobody ever. You can turn it off by sliding the background range slider
to zero under the document tab. I also recommend setting the colour to a neutral grey. Your eyes will be grateful for this! But how..? Just click on the colour and drag it to somewhere on the UI. Can’t find the right colour? Drag out the colour tab by clicking the icon at the top, and try again.
Don’t forget to hit the save as startup document button! Otherwise that pretty gradient will appear again when you restart ZBrush.
TOO MUCH PERSPECTIVE
Pressing “P” will switch between per spective view and non-perspective view. Both have their advantages and disadvantages, but as a general rule - turn it on. It’s the physically accurate way of viewing your model. The default value is a bit overkill though. You can lower it in the document panel.
ROTATION AXIS
ZBrush has several ways of rotating around your model. If you always end up upside-down after a while, try to change the rotation axis from XYZ
to Y. This will feel a lot more intuitive if you are used to for example Maya.
SUBDIVIDE SMOOTH / HARD
Do you know the feeling when you’ve worked extremely hard on a certain subdivision level, defined all those shapes the best you could, hit subdivide and your model looks -once again- like a blob? Yeah, I hated it as well. You can work around this by turning off the smooth button
, and smooth the forms that need to be smoothed out by hand. In my experience, it is way more fun to sculpt using this method. You should turn the smoothing back on when working on higher subdivision levels though!
On a side note, you should always try to get the most out of your current subdivision level before subdividing to a higher level.. It will be far easier to achieve good looking shapes and forms!
DYNAMIC / STATIC BRUSH SIZE
Inside the size box
we talked about earlier on, you’ll see greyed out text “dynamic”.
Well, it’s actually clickable and extremely invaluable. When it’s ticked, your brush size will always scale along with your distance to the model.
MIRRORING OBJECTS
A lot of times certain objects will have to be mirrored. Use the subtool master
for this! You can even choose whether you want to mirror it on a new subtool, or merge it with the current one. No more fiddling around to get the position more or less correct!
The subtool master is located under the plug-ins tab. Check it out if you haven’t already!
Hi Zino,
I am a really big fan of your work and was hoping you could answer a question I have. Since I read you’d love to talk about anything 3D.
I play arround with ZBrush myself from time to time. However what is not clear to me is at what level of detail to create and export a displacement map for it. I know the polygons must be reduced to a minimal, but wondered if you use any standards (if there even are any…) I texture in Mari.
Take care!
Best David
Hi David!
Personally I export displacement maps from the subdivision that holds all my primary forms. The displacement can produce the secondary and tertiary forms.
So practically this means that if you’d sculpt a head, make sure your base level holds all the forms, the eyelids, the shape of the nose, the shape of the ears, etc. Since regular displacement mapping can only push along your normal axis, you can’t re-create overlapping geometry with it.
A lot of the times for Mari I also export a higher subdiv level, and texture on that (obviously it needs to have the same UVs!) - it’s nice to have a bit more definition in your model when texturing, and if you want to use functions like Mari’s ambient occlusion or edge masks you will need this higher polycount. It is all rendered with openGL - Mari doesn’t raytrace and therefore these effects are dependent on the vertex count. If you use these procedures on an object with a polycount that is too low, you will see very ugly stepping which you’d never want.